1. OEM, ODM are acceptable
2. samples are available
1. There is a leak happened between the injector head / tongue
scraper and broom hand/haft?
The reason:the broom head do not coinside perfectly.
Solution:So first,take off the broom head,then reinstall it again.
2. the broom head broken?
The reason:the broom head is wearing out.
Solution: To change a new broom head.
3. The tube of the foundation of the water tooth pick cojoint haft
The reason:the tube has broken.
Solution:For the self-help service element,please contact the local
4. The water tank is leaking?
The reason:No tank valves are installed, or the wrong tank valve
(right position face down).
Solution :Please put the valve in a right position face up.
If need to change the valve of the water tank,please contact the
5. There is do not have a enough pressure?
The reason:the water tank installed in a wrong position.
Solution:Reinstalled the water tank,then push hard on the tank.
6. The equipment of the tooth pick can not be start?
The reason:the Motor do not working.
Solution:First,To make sure the exit can working normally,then
using other equipment to text it(checking the Electrical reset
button or checking the wall switch)